| Type: | Circular Sawing Machine |
|---|---|
| Track: | Linear |
| Controlling Mode: | CNC |
| Automatic Grade: | Automatic |
| Precision: | High Precision |
| Certification: | CE, ISO 9001, OHSAS18001 |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier | TECHNICAL SPECIFICATIONS | ||||
| MODEL | CL-75NC | |||
| Cutting Capacity | Bar | 8~72mm | 5/16"~2 5/6" | |
| Angle Material | 8~57mm | 5/16"~2 1/4" | ||
| Round Tube | 8~72mm | 5/16"~2 5/6" | ||
| Square Tube | 8~57mm | 5/16"~2 1/4" | ||
| Head Spindle | Use TCT Superhard Circular Saw Blade | φ250~285mm, T2.0mm | ||
| Pin Hole and Aperture | 4xφ11xPCD63xφ32 | |||
| Spindle Motor | 7.5KW(4P) | |||
| Spindle Speed | 20~200 | |||
| Cut Feed Mode | AC Servo Motor+Ball Screw /Swing Feed | |||
| Main Clamp Way | Hydraulic Type/Vertical and Horizontal Clamping of Each Group | |||
| Saw Blade Debris Removal Device | Passive Round Wire Brush/Active Round Wire Brush(Optional) | |||
| Gear Gap Compensation Device | Through-type Magnetic Power Brake | |||
| Feeding Clamps | Feeding Drive Mode | AC Servo Motor+Ball Screw | ||
| Feeding Clamp Way | Hydraulic Clamped | |||
| The Material Front End Removes the Length | 10~99 (Optional) | |||
| Material Back-end Material Length | 65mm+α(α is not enough to cut the length of a workpiece | |||
| Single Feed Cut Length | 6~800mm | |||
| Automatic Feeding Device |
Allow the Length of Material | 2000~6000mm | ||
| Supply Mode | Preloading/Hydraulic Lifting | |||
| Hydraulic Device | Hydraulic Pump Type | Preloading/Hydraulic Lifting | ||
| Hydraulic Drive Motor | 2.25(4P) | |||
| Hydraulic System Rated Pressure | 7MPa | |||
| Hydraulic Oil Capacity | 90L | |||
| Cutting Fluid Cooling Device |
Cutting Fluid Motor | 0.19KW(2P) | ||
| Size and Weight | Weight(Machine+Rack) | 2750kg | ||
| Size(LxW) | 7100x2200mm | |||
| STANDARD EQUIPMENT | |||
| 1. Saw Blade Deflection Shock Device | Tungsten Carbide Parallel Block | ||
| 2. Dispenser | Pneumatic/Reciprocating | ||
| 3. Automatic Centralized Grease Lubrication Syetem | Timely Quatitative Forced to the Oil | ||
| 4. Tool Micro-lubrication System | Quasi-dry Intermittent Oil | ||
| 5. Chip Conveyor | Chain Plate Type/Continuous or Intermittent Operation | ||
| 6. Work Lamp | LED/Waterproof and Dustproof | ||
| OPTIONAL DEVICE | |||
| 1. Electric Control Box Heat Exchanger | Closed High Efficiency Heat Exchange System | ||
| 2. Centrifugal Oil Mist Recovery Machine | Multi-level Filtering, Energy Saving and Environmental Protection | ||
| 3. Cluster Feeding Device | The Whole Bundle of Material, Long Material Cutting Preferred | ||
| 4. Third Clamp | The length of the material 20mm+α(α is not Enough to Cut the Length of a Workpiece) | ||
| 5. Hydraulic Wire Brush | Active Removal of Debries | ||
| 6. Long Material to Undertake Device(Discharge Device) | A Variety of Ways Flexible Choice, can be Equipped with Robots Expected Code Material | ||
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}